Handling and Displaying Big Salt Lamps From 20 kg to 250 kg+

Published 2026-11-07 · 6 minute read · by Al Goher Trader

The Big Lamp Range in the Catalogue

Large natural salt lamps are a different product from the desk and room lamps most retailers stock. In our 2025 catalogue they run from AGNSL-0020 (20 kg+) through AGNSL-0023 (30 kg+), AGNSL-0025 (50 kg+), AGNSL-0027 (100 kg+) and AGNSL-0028 (200 kg+) up to AGNSL-0029 (250 kg+). Each is a single piece of hand-mined Warcha crystal, so shape and height vary from piece to piece even within the same weight class. At this size a lamp stops being a shelf item and becomes a piece of furniture: it needs planning for delivery, a suitable floor, a safe electrical set-up and a place where people can see it without knocking into it.

This guide is about the practical side of owning, moving and showing these pieces. If you are still deciding which size suits a room, our lamp size guide covers that; here we assume the lamp is already chosen and on its way.

How Big Lamps Are Packed and Shipped

Every lamp from 7 kg upward leaves our factory individually wrapped, and from 10 kg a wooden base is standard. The big lamps are wrapped on a fitted wooden base or a table mount, and show-piece lamps above 160 kg ship on wooden tables built in our own workshop. That base is part of the product, not just packaging: it spreads the weight, keeps the crystal off the floor and gives you somewhere to lift from. Because big lamps are heavy and irregular, they are usually loaded on pallets or in crates inside the container, braced so they cannot shift. When you plan a container, tell us how many big pieces you are ordering so the load plan accounts for them alongside boxed lamps and other products.

Planning the Route Before Delivery

Before a big lamp arrives at a showroom, hotel lobby or customer’s home, walk the route it will take from the delivery vehicle to its final position. Measure doorways, corridors and lift doors, and check the lift’s rated load if the lamp is going upstairs. Look for steps, thresholds, tight turns and fragile flooring. A 50 kg lamp on its base can usually be handled by two people with care; at 100 kg and above you need more people, a pallet truck, a furniture dolly or a stair-climbing trolley, depending on the route. It is much easier to solve these problems on paper a week before delivery than in a doorway on the day.

Lifting and Moving Safely

Always lift a big lamp by its base or table mount, never by the crystal. Salt is strong under compression but can crack along natural fault lines if it is levered or twisted, and protruding points can snap if they take the weight. Keep the wrapping on while you move the lamp to protect the surface and your hands; salt edges can be sharp. Move slowly, keep the lamp upright, and set it down gently rather than dropping the last few centimetres. If you use a trolley or pallet truck, strap the base to it so the lamp cannot slide. Follow your own workplace manual-handling rules on how many people a lift needs; they exist for a reason and apply to salt as much as to any other heavy object.

Choosing a Spot: Floor, Load and Footfall

A big lamp needs a level, solid floor. On raised floors, older timber floors or mezzanines, check that the floor can carry a concentrated load before placing anything over 100 kg. Avoid positions where people will brush past the lamp constantly, such as narrow corridors or right beside a door that swings open. In public spaces, leave enough clearance that a child or a passing trolley is unlikely to hit it, and consider a low plinth or barrier for the heaviest pieces. A corner or alcove often works well: it protects the lamp on two sides and frames the glow against the walls.

Humidity and Placement

Like any salt lamp, a big lamp attracts moisture from the air, and the larger surface area means it shows more “sweating” in humid conditions. Keep it away from entrances that are open to rain, swimming pools, spas without dehumidification, bathrooms and kitchens. Do not place it directly on a stone or tiled floor that can stay damp; the wooden base helps, but a mat or plinth underneath adds protection. In humid climates, leaving the lamp switched on for longer periods keeps the surface warmer and drier. If the lamp is going into a space that is closed for long periods, such as a seasonal hotel wing, cover it loosely or move it to a dry store.

Electrical Set-Up for Large Lamps

Large lamps are supplied with a cord and bulb holder matched to your market when you order them that way — CE, UL or SAA. Run the cord so it cannot be tripped over or pulled, and never let the weight of the lamp rest on the cord. In public spaces, a floor cable cover or a socket positioned close to the lamp keeps the installation tidy and safe. Bulb wattage depends on the size of the cavity and how much glow you want; a larger crystal generally needs more light to glow evenly. Use only the bulb type and wattage recommended for the fitting, and check the cord and holder periodically, especially if the lamp is moved often. If you plan to connect a big lamp to a building lighting circuit, that is work for a qualified electrician.

Display Ideas for Showrooms, Hotels and Retail

Big lamps work best when they have space around them. In a showroom, place one or two big pieces at the entrance or at the end of an aisle as a focal point, with smaller lamps from the same grade nearby so customers can see the range. In hotel lobbies, spas and restaurants, a pair of matched big lamps either side of a doorway or reception desk is a common arrangement. White (AGNSL-0015) and gray (AGNSL-0016) natural lamps make a strong contrast next to pink crystal if you want variety. Lower ambient light makes the glow more visible, so a big lamp in a bright window display will look less impressive than the same lamp in a dimmer corner. Our own showroom at the factory uses big pieces this way, because they only make sense when seen in person.

Cleaning and Day-to-Day Care

Care is the same as for any salt lamp, just on a larger scale. Switch the lamp off and let it cool, then wipe the surface with a dry or very slightly damp cloth and dry it straight away. Never spray water or cleaning products on the crystal, and do not use it as a shelf for plants, drinks or anything else that could drip. Dust the base and check that it is still level and firm. If a big lamp has been sitting in a humid space and has developed a white crust, a dry cloth and a few hours switched on will usually restore the surface.

Check the base from time to time as well. Wooden bases and tables can dry out and loosen in heated buildings, and a base that rocks slightly puts uneven stress on the crystal. Tighten any fixings, place a felt pad under a base that has become uneven, and make sure the lamp still sits squarely before switching it on again.

Selling and Delivering Big Lamps to End Customers

If you resell big lamps, build delivery into the sale. Ask the customer about stairs, lifts and doorways before confirming the order, quote delivery as a separate service, and send a short note explaining that each lamp is unique so shape and colour will differ from the photo. Describe the lamp by what it is — a single natural crystal of a stated weight class on a wooden base, with a warm glow — rather than with wellness claims, which are not supported and can create problems with customers and regulators. Include care instructions with the lamp. Customers who understand what they are buying, and receive it safely in the right spot, are far more likely to recommend you than those who struggle with a heavy box on the doorstep.